頂天鋼鐵有限公司

Rating:
  • 首頁
  • 產品
  • 手工具, 金屬, 五金, 建築
  • 金屬, 五金
  • 幫浦
食品衛生級離心幫浦/泵浦

食品衛生級離心幫浦/泵浦

食品衛生級離心幫浦/泵浦

食品衛生級離心幫浦/泵浦

衛生級泵浦, 衛生級離心泵浦 (Osaka Sanitary Centrifugal Pumps Types)

Product ID: 3A-SANITARY PUMP

發送詢問

 

 食品衛生級高壓離心幫浦/泵浦

 Sanitary High Pressure Centrifugal Pumps

SE SERIES

SE Series 模組化設計概念,不同葉片組合能達到高輸出壓力。以先進科技製造SE 型高效率離心幫浦有寬廣應用,適合各種產業和流體。

搭配 IEC 標準馬達 ( standard IEC frame motors) 可達到高泵浦效率 (40-70%)

最大流量 (Flow rates) 200m³/h,最高揚程 ( heads) 150 m (15 bar) 。

 

食品衛生級離心泵浦/幫浦/馬達

Sanitary Centrifugal Pumps

 

 

CS Series centrifugal pumps are designed to meet the highest requirements of the food, beverage, pharmaceutical and chemical industries. A large number of pump sizes are available, as a result of the modular construction concept to which the pump components are designed.

The pump shaft is supported by one or two bearings (depending on the pump size). This provides both high strength and the convenience of supplying pumps with either standard IEC motors or bare shaft.

 

Flow rates range from 0 to 570 m³/h with heads up to 100 m(10 bar), low NPSHr and high efficiencies – saving energy and money. The CS Series is suitable for thin liquids to products with viscosities up to 800 centipoises.

商品規格
   
  • 最大吸入壓力 : 0.5MPa
  • 最高揚程 : 1.5MPa
  • 最大輸送量 : 200  M³/h
  • 輸送黏度 : 250 mPa*s
  • 最高溫度 : 140  ° C
  • 馬達容量 : 0.75KW ~ 37KW
  • 幫浦材質 : 不鏽鋼 304 / 316L
  • 出入口 : 3A / IDF / ISO 
  • 表面處理 : 內外拋光 # 320
        When properly sizing a pump, we need to know:
  • Liquid Data
⇒ Product       ⇒ Specific Gravity  
  • Operating Conditions
⇒     Capacity (LPM)       ⇒     Discharge Pressure (PSI) ⇒     Head Pressure (TDH) ⇒     Inlet Pressure (PSI) (Where NPSHₐ ≥ NPSHᵣ) ⇒     Viscosity (cP) - Ambient Temperature, Process Temperature      ⇒     Solid Size & Content   Horizontal and vertical runs are important factors when determining head.  Friction loss is critical to determining head pressure.  To properly size a pump, the size and type of all fittings, valves and equipment must be taken into consideration.
  • Suction Line                         • Discharge Line
⇒ Tubing Size_____________            ⇒ Tubing Size____________ ⇒ Vertical Drop____________            ⇒ Vertical Rise____________ ⇒ Total Elbows____________             ⇒ Horizontal Run__________ ⇒ Total Tees______________             ⇒ Total Elbows____________ ⇒ Total Valves_____________             ⇒ Total Tees______________                                                          ⇒ Total Valves_____________  
  • Discharge Valve(s) and/or Equipment
Butterfly_______ Ball_______ Disk Check_______Other_____________   DTI’s application engineers are available to assist you with diagnostic sizing.  A completed sizing sheet is paramount for correct pump selection.  There are many pump applications; determining which pump is appropriate for your needs is critical.     To ensure many years of successful processing, contact DTI Inc. to help size your pump today.
商品特色
  • 效率輸出,結構精實
  • IEC 標準馬達世界通用,維修簡單
  • 高幫浦效率 (40-70%),節能省電
  • 高揚程、高速運轉下有最佳 吸入效能 (suction performance)
  • 標準平衡口設計,適合 安全且長期操作
  • 鏡面不鏽鋼馬達保護罩,美觀實用
  1. 鍛造幫浦頭/本體 2. 內外鏡面拋光 3. 鏡面不銹鋼馬達防水罩附散熱孔 4. 分離式標準 IEC 馬達, 維修簡單, 適合出口 5. 附不鏽鋼馬達接線盒防水蓋, 符合工安標準
認證
  • BPE/3A/FDA

主要產品

1.不銹鋼BA管/EP管, 不鏽鋼BA/EP管配件,無縫不鏽鋼管. 2.真空軟管, 真空管件, 真空閥門, 真空管束, 真空法蘭, 真空零件. 3.生技製藥BPE管件,BPE衛生級隔膜閥,衛生幫浦,食品管件,衛生管件,衛生軟管,衛生級過濾器. 4.半導體管件,Swagelok

同類型產品

衛生食品級轉子幫浦, 衛生級轉子泵浦(Sanitary Lobe Rotor Pumps)/Sanitary Rotary Pumps/Waukesha/Nakakin

衛生食品級轉子幫浦, 衛生級轉子泵浦(Sanitary Lobe Rotor ...

食品衛生級螺旋幫浦, 高黏度泵浦, 定量幫浦(Sanitary Progressive Cavity Pumps) / Mohno Pump

食品衛生級螺旋幫浦, 高黏度泵浦, 定量幫浦(Sanitary Progres...

食品衛生級自吸式幫浦/泵浦(Iwai Kikai Kogyo Sanitary Self-priming Pumps Type)

食品衛生級自吸式幫浦/泵浦(Iwai Kikai Kogyo Sanitary...

聯絡資料

  • 業務聯絡人
    陳小姐 / 詹小姐
  • 地址
    241 新北市三重區光復路二段102巷1-2號
  • 電話
    886-2-22783666
  • 傳真
    886-2-85112456
  • 電子郵件
    dti999@ms43.hinet.net
  • 網址
    http://www.dtisanitary.com.tw
    https://tw.allproducts.com/metal/dingten/
  • Company Home
  • 產 品 分 類
    • 不銹鋼BA/EP管[8]
    • 不銹鋼真空軟管[20]
    • 真空管件[17]
    • 食品衛生級閥[3]
    • 衛生級幫浦[4]
    • 工程及設備[12]
    • 真空閥門[2]
    • 磷化銦晶圓( InP Wafer)[3]
    • 真空管件/真空閥門[4]
  • 認 証 與 獎 章
  • 最 新 訊 息
  • 研 發 與 技 術
  • 代 工
  • 型 錄
  • English

聯絡我們

  • 頂天鋼鐵有限公司
  • 地址
    241 新北市三重區光復路二段102巷1-2號
  • 電話
    886-2-22783666
  • 傳真
    886-2-85112456
聯絡供應商
  • 買家服務

    • 註冊
    • 免費採購服務
    • 常見問題
  • 供應商服務

    • 登入/註冊
    • 會員升級
    • 常見問題
    • 資訊服務
  • 貿易資訊

    • 訊息查詢
    • 刊登新訊息
    • 貿易資訊管理
    • 我的回覆紀錄
  • 支援

    • 支援中心
    • 聯絡我們
    • 交換連結
  • 首頁
  • 貿易資訊
  • 新聞稿
  • 提交產品
  • 簡易資訊聚合
  • 關於我們
  • 交換連結
  • 法律條款
  • 隱私權條款
  • 註冊
  • 使用者指南
Copyright © 1996-2016 All Products Online Corp. All rights reserved